Carburetor Idle solenoid valve damage first aid tips

   Hyundai Motor is equipped with a lot of cars in the carburetor idle speed solenoid valve, if the carburetor idle speed solenoid valve failure, the engine will not idle, will often turn off when idling.

     Causing solenoid valve is not working may be due to wire circuit or a loose connector, solenoid valve itself is invalid. Can repair the following methods:

     (1) first check the ignition switch wires to the solenoid valve is off, if the circuit should be connected by fasteners, otherwise, should check the idle speed solenoid valve.

     (2) first connected to the ignition switch, with input line connector and the socket away from the touch of a listen to whether or when the solenoid valve action "issued by despair, despair" sound. If yes, explain electromagnetic valve good; If there is no response, may be invalid or line solenoid valve connectors loose, should further examine the wire connectors.

     (3) General solenoid valve does not work because Department has loose joints caused by power outages. At this point the input lines can be inserted plug is good, his hands fiddle with joint office. As can be heard "despair" is heard, indicating where there is loosening.

     If the solenoid valve itself has a problem, nor the replacement of parts under the following methods can be used for emergency treatment: a hand toggle solenoid valve connectors, until the hearing of "despair" is heard, the hand holding down the joint, and then belt wrapped tight with tape, then pull the plug input line for a touch from a test, if "despair, despair," the action sound, then that has returned to normal, can continue to use. Note that the above process should be connected to the ignition switch status, 2, if confirmed Idle solenoid valve is damaged, for the restoration of the role of idling. Solenoid valve should be removed, and with the appropriate blocked drain plug, so that does not leak. In this way, solenoid valve loses its function, as there is no idle speed solenoid valve carburetor. ball valve Trunnion Mounted Ball Valve Floating Ball Valve Top Entry Ball Valve ball valve V Type Ball Valve
We can offer more Knife Gate Valve Information.If you need us according your spcification to produce the Knife Gate Valve .
Need, please e-mail to valve401@gmail.com s