How to solve the valves in the course of the common minor problems

1, why is a small two-seater valve opening hours of work likely oscillation?

     Pairs of single-core, when the medium is open-type flow, the valve stability; when the medium is a closed-type flow, the valve of the stability of the difference. There are two spool valve seat, the next spool in the flow of closed, open on the spool in the flow, so that a small opening in the work, the flow of closed-type valve spool is easy to cause vibration, which is two-seat valve can not be used for the work of a small opening reason.

2, why double-sealing valve as a shut-off valves can not be used?

     Two-seat valve spool force balance the advantages of the structure, allowing large differential pressure, and its obvious drawback is that two sealing surface can not be good contacts at the same time, resulting in large leakage. If it is artificially Mandatory used to cut off occasion, apparently ineffective, even if it made a lot of improvements (such as the double-sealed sleeve valve), is also undesirable.

3, what straight poor performance, aiming to halt the stroke control valve, angle valve, prevent the travel of good performance?

     Direct travel is vertical throttle valve spool, while the medium is the level of flow into the outflow valve cavity flow channel bound to turn down Shui Po, so that the valve flow path becomes quite complex (shape such as the inverted "S" type). In this way, there are many dead zone, the precipitation of the medium provides a space for the long run, causing blockage. The direction of travel throttle valve angle is the horizontal direction, the level of flows into the medium, the level of outflow, easy to clean media is not removed, flow path at the same time simple and very little room for medium precipitation, therefore, prevent the valve angle stroke of good performance.

4, why do straight stroke adjustment valve stem smaller?

     It involves a simple mechanical principle: sliding friction, rolling friction small. Trip valve stem straight up and down movement, packing slightly pressed a little, it will stem bag tightly, resulting in a larger backlash. To this end, valve stem is designed to be very small, they often fill a small
We can offer more Knife Gate Valve Information.If you need us according your spcification to produce the Knife Gate Valve .
Need, please e-mail to valve401@gmail.com